Springs, Rear, TR250, TR6, 600 lb/in.

SKU: 1255 Categories: ,
Dimensions: 10 × 9 × 4.5 in
Weight: 14.25lbs

$139.00

Out of stock

Upgraded rear springs

Fits Triumph TR4A IRS, TR250 and TR6

Sold as a pair

Description

Good Parts rear springs offer both increased stiffness and lower ride height compared to factory TR6 rear springs. Spring rate is 600 lb/in compared to the approximately 350 lb/in. of the stock springs. Ride height is approximately 14-14 ½ inches from the center of the wheel to the fender edge, which is roughly 1” lower than factory spec springs. Ride height can be increased with Good Parts aluminum spring spacers. Spring free length is approximately 9 ¾ inches.

Installation Note:

Springs will often settle slightly during initial use. Taking a short drive or rolling the car back and forth on a flat surface after installation will allow the springs to settle into place before final ride height measurements are taken.

Additional information

Weight 14.25 lbs
Dimensions 10 × 9 × 4.5 in

Reviews

There are no reviews yet.

Be the first to review “Springs, Rear, TR250, TR6, 600 lb/in.”

Your email address will not be published. Required fields are marked *

You may also like…

Have a question about this product?