Wheel Stud, Dorman, for Good Parts Rear Hub through 4/9/2023 (choose length)

Dimensions: 1.75 × .75 × .75 in
Weight: .1lbs



These Dorman wheel studs are direct replacement for your Good Parts rear hub assembly SKU 112 manufactured through 4/9/2023.  Good Parts rear hubs manufactured 4/10/2023 and later are fitted with ARP studs which used a slightly larger hole.  ARP studs can be fitted to earlier Good Parts rear hubs by enlarging the holes from .464″ to .471″.  Studs listed for Good Parts rear hub do not fit original hubs.

Use 1-3/16″ wheel studs for factory for steel wheels, 7/8″ studs for wire wheels, 1-3/8″ studs for thicker alloy wheels, 1-9/16″ or 1-3/4″ studs for use with wheel spacers or 2-3/4″ studs (2-1/2″ to end of threads).

NOTE: These studs are standard 7/16-20 thread. Stud length is measured from face of hub flange without the brake drum installed.

Additional information

Weight .1 lbs
Dimensions 1.75 × .75 × .75 in
Wheel Stud Length

7/8" factory length for wire wheels, 1-3/16” factory length for steel wheels, 1-3/8", 1-9/16” for steel wheels with 3/8” spacers, 1-3/4"

Have a question about this product?