|
more info...
|
|
|
|
|
Price:
US $545.00
|
|
Includes two Wilwood four piston calipers with 1.38" pistons, mounting hardware and braided stainless steel flexlines to connect from the hard line on the frame to the caliper. Does not include brake pads. Order your choice of pads below. Uses stock size 10.82" x .5" rotor (not included). Easy bolt-on installation. Fits with all wheels. Each caliper weighs only 4.9 lbs compared to the stock caliper at 9.6 lbs. This reduces unsprung weight by 4.7 lbs per side!
|
|
|
|
more info...
|
|
|
|
|
Price:
US $1,199.00
|
|
1.38" Pistons. Does not include brake pads. Order your choice of pad sets below.
Sorry for the price misprint in the January 2010 issue of Classic Motorsports. The correct price is $1199.
|
|
|
|
more info...
|
|
|
|
|
Price:
US $545.00
|
|
Includes two Wilwood four piston calipers with 1.62" pistons, mounting hardware and braided stainless steel flexlines to connect from the hard line on the frame to the caliper. Does not include brake pads. Order your choice of pads below. Uses stock size 10.82" x .5" rotor (not included). Easy bolt-on installation. Fits with all wheels. Each caliper weighs only 4.9 lbs compared to the stock caliper at 9.6 lbs. This reduces unsprung weight by 4.7 lbs per side!
|
|
|
|
more info...
|
|
|
|
|
Price:
US $1,199.00
|
|
1.75" Pistons. Does not include brake pads. Order your choice of pad sets below.
Sorry for the price misprint in the January 2010 issue of Classic Motorsports. The correct price is $1299.
|
|
|
|
more info...
|
|
|
|
|
Price:
US $799.00
|
|
Includes two Wilwood four piston calipers with 1.38" pistons, rotor mounting hats, hardware and braided stainless steel flexlines to connect from the hard line on the frame to the caliper. Does not include brake pads. Order your choice of pads below. Uses Wilwood vented 10.75" x .81" rotor (not included, order below). Easy bolt-on installation. Fits with all wheels. Each caliper weighs only 4.9 lbs compared to the stock caliper at 9.6 lbs. Also the hat and rotor is 1.5 lbs lighter than the stock rotor. This reduces unsprung weight by a total of 6.2 lbs per side!
|
|
|
|
more info...
|
|
|
|
|
Price:
US $47.00
|
|
Includes pads for both sides.
Heavy duty pads with increased friction and temperature range over OE type compound pads. Beds quickly and provides fast response without excessive abrasion on rotors.
Heat Range: Low to Med-High *** Cold Torque: Medium *** Hot Torque: Medium - High *** Wear Rate: Medium
|
|
|
|
more info...
|
|
|
|
|
Price:
US $799.00
|
|
Includes two Wilwood four piston calipers with 1.62" pistons, rotor mounting hats, hardware and braided stainless steel flexlines to connect from the hard line on the frame to the caliper. Does not include brake pads. Order your choice of pads below. Uses Wilwood vented 10.75" x .81" rotor (not included, order below). Easy bolt-on installation. Fits with all wheels. Each caliper weighs only 4.9 lbs compared to the stock caliper at 9.6 lbs. Also the hat and rotor is 1.5 lbs lighter than the stock rotor. This reduces unsprung weight by a total of 6.2 lbs per side!
|
|
|
|
more info...
|
|
|
|
|
Price:
US $82.00
|
|
Includes pads for both sides.
Intermediate duty road racing, autocross and rally.
Heat Range: Medium to X-High *** Cold Torque: Medium - High *** Hot Torque: High *** Wear Rate: Low
|
|
|
|
more info...
|
|
|
|
|
Price:
US $69.00
|
|
Replaces rubber hose from hard line at frame to fastening point at front of trailing arm.
|
|
|
|
more info...
|
|
|
|
|
Price:
US $769.00
|
|
Does not fit with stock steel wheels. Fits with alloys or wire wheels. Includes two Wilwood four piston calipers with 1.38" pistons, rotor mounting hats, hardware and braided stainless steel flexlines to connect from the hard line on the frame to the caliper. Does not include brake pads. Order your choice of pads below. Uses Wilwood vented 11.0" x .81" rotor (not included, order below). Easy bolt-on installation. Fits with all wheels. Each caliper weighs only 4.9 lbs compared to the stock caliper at 9.6 lbs. Also the hat and rotor is 1.2 lbs lighter than the stock rotor. This reduces unsprung weight by a total of 5.9 lbs per side!
|
|
|
|
more info...
|
|
|
|
|
Price:
US $769.00
|
|
Does not fit with stock steel wheels. Fits with alloys or wire wheels. Includes two Wilwood four piston calipers with 1.62" pistons, rotor mounting hats, hardware and braided stainless steel flexlines to connect from the hard line on the frame to the caliper. Does not include brake pads. Order your choice of pads below. Uses Wilwood vented 11.0" x .81" rotor (not included, order below). Easy bolt-on installation. Fits with all wheels. Each caliper weighs only 4.9 lbs compared to the stock caliper at 9.6 lbs. Also the hat and rotor is 1.2 lbs lighter than the stock rotor. This reduces unsprung weight by a total of 5.9 lbs per side!
|
|
|
|
more info...
|
|
|
|
|
Price:
US $54.00
|
|
Includes pads for both sides.
Heavy duty pads with increased friction and temperature range over OE type compound pads. Beds quickly and provides fast response without excessive abrasion on rotors.
Heat Range: Low to Med-High *** Cold Torque: Medium *** Hot Torque: Medium - High *** Wear Rate: Medium
|
|
|
|
more info...
|
|
|
|
|
Price:
US $20.00
|
|
Price per each. Allows use of stock steel wheel with disc brake conversion. Requires longer wheel studs listed below.
|
|
|
|
more info...
|
|
|
|
|
Price:
US $110.00
|
|
Includes pads for both sides.
Intermediate duty road racing, autocross and rally.
Heat Range: Medium to X-High *** Cold Torque: Medium - High *** Hot Torque: High *** Wear Rate: Low
|
|
|
|
more info...
|
|
|
|
|
Price:
US $1.50
|
|
Price per each stud.
Fits Good Parts hub. Will not fit stock hub. Protrudes from hub 1-3/4" as compared to the 1-3/8" studs normally supplied in Good Parts hubs. Use these studs in Good Parts hubs when using 3/8" wheel spacers. These studs are also listed on the "Uprated Axle/Hub Kits" page as a low cost option when ordering Good Parts hubs.
|
|
|
|
more info...
|
|
|
|
|
Price:
US $3.20
|
|
Price per each stud. Requires enlarging of hole in stock hub. Protrudes from hub 2-9/16" to end, 2-1/4" to end of threads. May need to be shortened to use closed end lug nut. (This stud does not fit Good Parts hub.)
|
|
|
|
more info...
|
|
|
|
|
Price:
US $69.00
|
|
Price per pair.
Stock replacement rotors
|
|
|
|
more info...
|
|
|
|
|
Price:
US $129.00
|
|
Price per pair.
Made by TRW. Drilled and slotted to improve braking by venting of gasses. Same size as stock rotor.
|
|
|
|
more info...
|
|
|
|
|
Price:
US $189.00
|
|
Ultra-Light ULHP straight vane rotors provide high value performance and rugged durability for a wide range of performance and sport driving applications.
|
|
|
|
more info...
|
|
|
|
|
Price:
US $319.00
|
|
SRP Black Electro Coat Drilled Performance Series Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The black electro coat inhibits corrosion on all areas of the rotor.
|
|
|
|
more info...
|
|
|
|
|
Price:
US $189.00
|
|
Ultra-Light ULHP straight vane rotors provide high value performance and rugged durability for a wide range of performance and sport driving applications.
|
|
|
|
more info...
|
|
|
|
|
Price:
US $319.00
|
|
SRP Black Electro Coat Drilled Performance Series Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The black electro coat inhibits corrosion on all areas of the rotor.
|
|
|
