Currency:
Catalog
Search

Sort by: name (ascending | descending), price (ascending | descending), customer rating (ascending | descending)

Seal to fit on full size guide. Does not fit inside inner valve spring. Use with single valve springs only.

US $24.00

These push rods are 5/16" diameter with .049" wall thickness and are rated for up to 500 lbs valve spring pressure.  Valve springs used in the TR6 engine are generally under 200 lbs at full open so these push rods offer more than ample strength margin.  With each push rod weighing about 10 grams less than the original, I believe these push rods offer the best strength to weight ratio.

Push rods are measured by "Effective Length" from the bottom of the cup to the lower end.  Lengths other than those listed are available by special order.

US $119.00

Price per each.

US $6.00

Price per each. Can be used in later head by enlarging seat.

US $27.00

Price per each.

US $27.00

Price per each.

US $4.50
US $45.00
US $4.50

Price per each.

US $25.00

Price per each

US $33.00
US $27.00

Price per each. Can be used in later head by enlarging seat.

US $8.00

Price per each.

US $8.00

Price per each. Hardened spring seat keeps springs from wearing into head and centers the inner and outer springs around the guide. Springs are raised .040" above the surface of the head.  Fits outer spring OD 1.125" and inner spring ID .585".

US $5.00

Intake guide for TR2, TR3, TR4, TR250, TR6, GT6 1968 - 1973.  Intake and Exhaust guide for TR4A, Spitfire 1967 - 1980, MG Midget 1500 1975 - 1979.             

US $5.50

Exhaust guide for GT6 1968 - 1973, TR250, TR6.  Intake and exhaust guide Spitfire 1962 - 1967.

US $5.50

Handles up to approximately .500" lift.  Includes spacer washers for under inner springs to help center springs around guide.

US $85.00

These are top quality USA made valve locks.

US $7.50

These push rods are 5/16" diameter with .049" wall thickness and are rated for up to 500 lbs valve spring pressure.  Valve springs used in the TR6 engine are generally under 200 lbs at full open so these push rods offer more than ample strength margin.  With each push rod weighing about 10 grams less than the original, I believe these push rods offer the best strength to weight ratio.

Push rods are measured by "Effective Length" from the bottom of the cup to the lower end.  Lengths other than those listed are available by special order.

US $149.00

These push rods are 5/16" diameter with .049" wall thickness and are rated for up to 500 lbs valve spring pressure.  Valve springs used in the TR6 engine are generally under 200 lbs at full open so these push rods offer more than ample strength margin.  With each push rod weighing about 10 grams less than the original, I believe these push rods offer the best strength to weight ratio.

Push rods are measured by "Effective Length" from the bottom of the cup to the lower end.  Lengths other than those listed are available by special order.

US $149.00

These Viton seals fit over the standard .50" diameter valve guide and fit inside of the dual valve springs.  Set includes machined steel installation tool.

US $24.00

These Viton seals fit over the standard .50" diameter valve guide and fit inside of the dual valve springs.

US $2.00

These push rods are 5/16" diameter with .049" wall thickness and are rated for up to 500 lbs valve spring pressure.  Valve springs used in the TR6 engine are generally under 200 lbs at full open so these push rods offer more than ample strength margin.  With each push rod weighing about 10 grams less than the original, I believe these push rods offer the best strength to weight ratio.

Push rods are measured by "Effective Length" from the bottom of the cup to the lower end.  Lengths other than those listed are available by special order.

US $149.00

Price per each. Use for intake and exhaust. Fits spring set above and original springs. Weighs 6.1 grams compared to original 11.3 gram intake and 12.3 gram exhaust. Increases installed height of spring approx .050".

US $18.00

Small diameter seal to fit on guide which has been turned down to .415" diameter and fit inside inner valve spring.

US $24.00

Handles up to approximately .470" lift.  Includes spacer washers for under inner springs to help center springs around guide.

US $85.00
(empty)
 
Blog / News
Subscribe for email newsletter (blog):
or RSS 2.0
Survey



© GoodParts.
Powered by WebAsyst Shop-Script shopping cart software